The concentration of the foaming liquid in the cement foaming machine of the high-pressure foaming machine manufacturer is a key factor in foaming. The concentration configuration of the foaming liquid also varies for different cement varieties and construction requirements. Below is a basic configuration method introduced by the manufacturer of high-pressure foaming machines. As follows:

High pressure foaming machine manufacturer _ Analysis on how to configure the concentration of foaming solution for cement foaming machine

It is necessary to prepare foaming agent and water. Generally, the ratio of foaming agent to water is 1:0.5. Pour the foaming agent into a container, add an appropriate amount of water, and stir evenly with a mixer to make it a uniform slurry.

Pour the slurry into the foaming machine, add an appropriate amount of cement, and stir evenly. During the mixing process, it is important to be careful not to let the slurry overflow to avoid waste and environmental pollution.

Manufacturers of high-pressure foaming machines are adjusting the ratio of the foaming machine, which is generally 1:1.2. After adjusting the ratio, the foaming operation can begin.

It should be noted that different cement varieties have different requirements for the concentration of foaming liquid, which needs to be adjusted according to the actual situation. If the foaming liquid has problems such as uneven foam and low foam content during use, the concentration of foaming liquid and the proportion of foaming machine need to be adjusted in time to ensure the construction quality.